DM8168 PWM驅動與測試程序

昨天把DM8168的Timer設置給摸了一遍，為寫PWM的底層驅動做好了准備，現在就要進入主題了。

dm8168_pwm.c:

#include 
#include 
#include 
#include  /* copy_to_user,copy_from_user */
#include 
#include 
#include 

static struct class  *pwm_class;

volatile unsigned long *CLK_CTL;
volatile unsigned long *TCLR;
volatile unsigned long *TCRR;
volatile unsigned long *TLDR;
volatile unsigned long *TMAR;

int pwm_open (struct inode *inode,struct file *filp)

{
	*CLK_CTL = 0x00000002;
	*TCLR    = 0;
	*TLDR    = 0xffffffe0;
	*TMAR    = 0xfffffff0;
	*TCRR    = 0xffffffe0;
	return 0;
}

ssize_t pwm_read (struct file *filp, char __user *buf, size_t count,loff_t *f_pos)
{
	return 0;
}

ssize_t pwm_write (struct file *filp, const char __user *buf, size_t count,loff_t *f_pos)
{
	char duty_buf[2];
	int ret;
	ret = copy_from_user(duty_buf,buf,count);		
	*TMAR    = 0xffffffe0 + (unsigned char)(duty_buf[0]*30/100);  //分辨率略低，僅為demo
	*TCLR    = 0x1843;
	return count;
}

struct file_operations pwm_fops =
{
	.owner   = THIS_MODULE,
	.open    = pwm_open,
	.read    = pwm_read,
	.write   = pwm_write,
} ;

int major;
int pwm_init (void)
{ 	
	
	major = register_chrdev(0,"DM8168_PWM",&pwm_fops);
	pwm_class = class_create(THIS_MODULE, "DM8168_PWM");
	device_create(pwm_class,NULL,MKDEV(major,0),NULL,"pwm");

	CLK_CTL = (volatile unsigned long *)ioremap(0x4818157C,4);
	TCLR    = (volatile unsigned long *)ioremap(0x48044038,4);
	TCRR    = (volatile unsigned long *)ioremap(0x4804403C,4);
	TLDR    = (volatile unsigned long *)ioremap(0x48044040,4);
	TMAR    = (volatile unsigned long *)ioremap(0x4804404C,4);
	printk ("pwm is ready\n");
	return 0;
}

void pwm_exit (void)
{
	unregister_chrdev(major,"DM8168_PWM");
	device_destroy(pwm_class,MKDEV(major,0));
	class_destroy(pwm_class);

	iounmap(CLK_CTL);
	iounmap(TCLR);
	iounmap(TCRR);
	iounmap(TLDR);
	iounmap(TMAR);
	printk ("module exit\n");
	return ;
}

MODULE_LICENSE("GPL");
module_init(pwm_init);
module_exit(pwm_exit);

obj-m:= dm8168_pwm.o

CROSSCOMPILE := /opt/codesourcery/arm-2009q1/bin/arm-none-linux-gnueabi-

CC  := $(CROSSCOMPILE)gcc 

KDIR:=/home/***/ti-ezsdk_dm816x-evm_5_03_01_15/board-support/linux-2.6.37-psp04.00.01.13.patch2

PWD :=$(shell pwd)

default:
	$(MAKE) -C $(KDIR) M=$(PWD) modules ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
clean:
	rm -rf *.ko *.o .*cmd *.mod.c .tmp_versions 

#include 
#include 
#include 
#include 

int pow_10(char m)
{
	int j;
	int res=1;
	for(j=0;j

測試 ：

模塊編譯後加載：insmod dm8168_pwm.ko
交叉編譯測試程序：arm-none-linux-gnueabi-gcc -o pwm_test pwm_test.c
運行：./pwm_test 50
輸出為50%的PWM波形，測試成功。