這個都是過去DOS時代的匯編源碼，雖然已經過去了，但是對於學習匯編還是有幫助的，匯編語言只是程序員一門基礎語言，大多人掌握即可，不一定要深入研究.......
; Drive detection by: Lee Hamel ([email protected]) - July 6th, 1994
; Partial credit to : Paul Schlyter
;
; Goes thru drives A-Z and determines if they:
; 1) Exist
; 2) Are removable or fixed
; 3) Are local, remote, or shared
; 4) Are a floppy, hard, RAM, subst, or CD-ROM drive
.model tiny
.286
DRIVEXISTS EQU 1
REMOVEDRV EQU 0
FIXEDDRV EQU 1
LOCALDRV EQU 0
REMOTEDRV EQU 1
SHAREDRV EQU 2
FLOPPY EQU 0
HARD EQU 1
RAM EQU 2
SUBST EQU 3
CDROM EQU 4
.code
org 100h
start: mov ah,19h
int 21h ; get start drive
mov [curdrive],al
mov ax,40h
mov es,ax
mov bh,es:[10h] ; 40:10h is # of floppies-1
shr bh,6
inc bh ; # of actual floppy drives
mov bl,1
mov di,offset drives
nextchkfloppy: mov ax,4409h ; check if drive exists
int 21h
jc nextsetfloppy
test dh,10000000b ; check if SUBST drive
jz chkfloppy
dec bh ; dec actual drive count
mov byte ptr [di+3],SUBST
setfloppyexist: mov byte ptr [di],DRIVEXISTS
jmp nextsetfloppy
chkfloppy: dec bh ; dec actual drive count
js nextsetfloppy
mov byte ptr [di+1],REMOVEDRV
mov byte ptr [di+3],FLOPPY
jmp setfloppyexist
nextsetfloppy: add di,4
inc bl
cmp bl,2 ; if B then jump back
je nextchkfloppy
mov ch,24 ; loop 24 times (drives C - Z)
mov cl,3 ; start at C:
drivechkloop: mov ax,4409h ; check if drive exists
mov bl,cl ; set drive letter
int 21h ; 0 = default, 1 = A:, etc.
jc nextsetdrv
mov byte ptr [di],DRIVEXISTS
mov ax,4408h ; check if removable
int 21h
mov byte ptr [di+1],al ; set REMOVABLE or FIXED
mov bx,dx
mov dl,dh
shr dl,7
and dh,00010000b
shr dh,4
mov byte ptr [di+2],dh ; set REMOTE or LOCAL
or dl,dl ; if not SUBST, then jump
jz chkremote
mov byte ptr [di+3],SUBST
jmp nextsetdrv
chkremote: cmp dh,REMOTEDRV ; if REMOTE, then check for CD ROM
je chkcdrom
test bh,00000010b ; sharable?
jz drivenoshare
mov byte ptr [di+2],SHAREDRV
drivenoshare: test bl,00000010b ; RAM drive?
jnz nextsetdrv
mov byte ptr [di+3],RAM
jmp nextsetdrv
chkcdrom: push cx
mov ax,1500h
xor bx,bx
int 2fh
pop cx
or bx,bx ; MSCDEX driver found?
jz nextsetdrv ; if not, jump to next drive setup
mov ax,150bh
dec cl ; 0=A:, etc.
int 2fh
inc cl
or ax,ax
jz nextsetdrv ; drive supported by MSCDEX?
mov byte ptr [di+3],CDROM
nextsetdrv: add di,4
inc cl
dec ch
jnz drivechkloop
mov ah,0eh
mov dl,[curdrive]
int 21h ; reset start drive
mov cl,'A' ; output all existing drives
mov di,offset drives
mov ah,9
drvdumploop: cmp byte ptr [di],DRIVEXISTS
jne nextdrvdump
mov al,cl
int 29h
xor dh,dh
mov dl,byte ptr [di+1]
shl dx,4
add dx,offset removablemsg
int 21h
xor dh,dh
mov dl,byte ptr [di+2]
shl dx,3
add dx,offset localmsg
int 21h
xor dh,dh
mov dl,byte ptr [di+3]
shl dx,3
add dx,offset typemsg
int 21h
mov dx,offset crlf
int 21h
nextdrvdump: add di,4
inc cl
cmp cl,'Z'
jbe drvdumploop
ret
curdrive db 0
drives db 26 dup(0,1,0,1)
; default to not exist, fixed, local, hard drive
crlf db 10,13,'$'
removablemsg db ': Removable $'
db ': Fixed $'
localmsg db 'Local $'
db 'Remote $'
db 'Shared $'
typemsg db 'Floppy $'
db 'Hard $'
db 'RAM $'
db 'Subst $'
db 'CD-ROM $'
end start
