基於keepalived搭建MySQL的高可用集群，keepalived搭建mysql

基於keepalived搭建MySQL的高可用集群，keepalived搭建mysql

MySQL的高可用方案一般有如下幾種：

keepalived+雙主，MHA，MMM，Heartbeat+DRBD，PXC，Galera Cluster

比較常用的是keepalived+雙主，MHA和PXC。

對於小公司，一般推薦使用keepalived+雙主，簡單。

下面來部署一下

配置環境：

角色                                    主機IP                    主機名               操作系統版本     軟件版本

VIP                                    192.168.244.10

master1                             192.168.244.145       master1            CentOS7.1       MySQL 5.6.26，Keepalived v1.2.13

master2                             192.168.244.146       master2            CentOS7.1       MySQL 5.6.26，Keepalived v1.2.13

一、 配置MySQL雙主復制環境

     1. 修改配置文件

      master1中有關復制的配置如下：

[mysqld]
log-bin=mysql-bin
server-id=1
log_slave_updates=1

     master2

[mysqld]
log-bin=mysql-bin
server-id=2
log_slave_updates=1
read_only=1

   2. 創建復制用戶

    master1中創建：

CREATE USER 'repl'@'192.168.244.146' IDENTIFIED BY 'mysql';
GRANT REPLICATION SLAVE ON *.* TO 'repl'@'192.168.244.146';

    master2中創建：

CREATE USER 'repl'@'192.168.244.145' IDENTIFIED BY 'mysql';
GRANT REPLICATION SLAVE ON *.* TO 'repl'@'192.168.244.145';

  3. 執行CHANGE MASTER TO語句

     因是從頭搭建MySQL主從復制集群，所以不需要獲取全局讀鎖來得到二進制日志文件的位置，直接根據show master status的輸出來確認。

     master1上執行：

CHANGE MASTER TO
  MASTER_HOST='192.168.244.146',
  MASTER_USER='repl',
  MASTER_PASSWORD='mysql',
  MASTER_LOG_FILE='mysql-bin.000004',
  MASTER_LOG_POS=64729;

    master2上執行：

CHANGE MASTER TO
  MASTER_HOST='192.168.244.145',
  MASTER_USER='repl',
  MASTER_PASSWORD='mysql',
  MASTER_LOG_FILE='mysql-bin.000003',
  MASTER_LOG_POS=68479;

    4. 分別在兩個節點上執行start slave語句並通過show slave status\G查看復制是否搭建成功。

        成功標准：

Slave_IO_Running: Yes
Slave_SQL_Running: Yes

二、 配置Keepalived

     1. 安裝Keepalived

      # yum install -y keepalived

      當然，也可直接編譯官方的源碼包。

     2. 修改Keepalived的配置文件

     master1

     [root@master1 ~]# vim /etc/keepalived/keepalived.conf

vrrp_script chk_mysql {
    script "/etc/keepalived/check_mysql.sh"
    interval 30         #設置檢查間隔時長，可根據自己的需求自行設定
}
vrrp_instance VI_1 {
    state BACKUP        #通過下面的priority來區分MASTER和BACKUP，也只有如此，底下的nopreempt才有效
    interface eno16777736
    virtual_router_id 51
    priority 100
    advert_int 1
    nopreempt           #防止切換到從庫後，主keepalived恢復後自動切換回主庫
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    track_script {
        chk_mysql
    }
     
    virtual_ipaddress {
        192.168.244.10/24
    }
}

關於keepalived的參數的詳細介紹，可參考：LVS+Keepalived搭建MyCAT高可用負載均衡集群

其中，/etc/keepalived/check_mysql.sh內容如下：

#!/bin/bash
 
###判斷如果上次檢查的腳本還沒執行完，則退出此次執行
if [ `ps -ef|grep -w "$0"|grep -v "grep"|wc -l` -gt 2 ];then
    exit 0
fi 
mysql_con='mysql -uroot -p123456'
error_log="/etc/keepalived/logs/check_mysql.err"
 
###定義一個簡單判斷mysql是否可用的函數
function excute_query {
    ${mysql_con} -e "select 1;" 2>> ${error_log}
}
 
###定義無法執行查詢，且mysql服務異常時的處理函數
function service_error {
    echo -e "`date "+%F  %H:%M:%S"`    -----mysql service error，now stop keepalived-----" >> ${error_log}
    service keepalived stop &>> ${error_log}
    echo "DB1 keepalived 已停止"|mail -s "DB1 keepalived 已停止,請及時處理！" [email protected] 2>> ${error_log}
    echo -e "\n---------------------------------------------------------\n" >> ${error_log}
}
 
###定義無法執行查詢,但mysql服務正常的處理函數
function query_error {
    echo -e "`date "+%F  %H:%M:%S"`    -----query error, but mysql service ok, retry after 30s-----" >> ${error_log}
    sleep 30
    excute_query
    if [ $? -ne 0 ];then
        echo -e "`date "+%F  %H:%M:%S"`    -----still can't execute query-----" >> ${error_log}
 
        ###對DB1設置read_only屬性
        echo -e "`date "+%F  %H:%M:%S"`    -----set read_only = 1 on DB1-----" >> ${error_log}
        mysql_con -e "set global read_only = 1;" 2>> ${error_log}
 
        ###kill掉當前客戶端連接
        echo -e "`date "+%F  %H:%M:%S"`    -----kill current client thread-----" >> ${error_log}
        rm -f /tmp/kill.sql &>/dev/null
        ###這裡其實是一個批量kill線程的小技巧
        mysql_con -e 'select concat("kill ",id,";") from  information_schema.PROCESSLIST where command="Query" or command="Execute" into outfile "/tmp/kill.sql";'
        mysql_con -e "source /tmp/kill.sql"
        sleep 2    ###給kill一個執行和緩沖時間
        ###關閉本機keepalived       
        echo -e "`date "+%F  %H:%M:%S"`    -----stop keepalived-----" >> ${error_log}
        service keepalived stop &>> ${error_log}
        echo "DB1 keepalived 已停止"|mail -s "DB1 keepalived 已停止,請及時處理！" [email protected] 2>> ${error_log}
        echo -e "\n---------------------------------------------------------\n" >> ${error_log}
    else
        echo -e "`date "+%F  %H:%M:%S"`    -----query ok after 30s-----" >> ${error_log}
        echo -e "\n---------------------------------------------------------\n" >> ${error_log}
    fi
}
 
###檢查開始: 執行查詢
excute_query
if [ $? -ne 0 ];then
    service mysqld status &>/dev/null
    if [ $? -ne 0 ];then
        service_error
    else
        query_error
    fi
fi

通過具體的查詢語句來判斷數據庫服務的可用性，如果查詢失敗，則判斷mysqld進程本身的狀態，如果不正常，則直接停止當前節點的keepalived，將VIP轉移到另外一個節點，如果正常，則等待30s，再次執行查詢語句，還是失敗，則將當前的master節點設置為read_only，並kill掉當前的客戶端連接，然後停止當前的keepalived。

       master2 

       [root@master2 ~]# vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived
 
vrrp_instance VI_1 {
    state BACKUP
    interface eno16777736
    virtual_router_id 51
    priority 90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    notify_master /etc/keepalived/notify_master_mysql.sh    #此條指令告訴keepalived發現自己轉為MASTER後執行的腳本
    virtual_ipaddress {
        192.168.244.10/24
    }
}

其中，/etc/keepalived/notify_master_mysql.sh的內容如下：

#!/bin/bash
###當keepalived監測到本機轉為MASTER狀態時，執行該腳本
 
change_log=/etc/keepalived/logs/state_change.log
mysql_con='mysql -uroot -p123456'
echo -e "`date "+%F  %H:%M:%S"`   -----keepalived change to MASTER-----" >> $change_log
 
slave_info() {
    ###統一定義一個函數取得slave的position、running、和log_file等信息
    ###根據函數後面所跟參數來決定取得哪些數據
    if [ $1 = slave_status ];then
        slave_stat=`${mysql_con} -e "show slave status\G;"|egrep -w "Slave_IO_Running|Slave_SQL_Running"`
        Slave_IO_Running=`echo $slave_stat|awk '{print $2}'`
        Slave_SQL_Running=`echo $slave_stat|awk '{print $4}'`
    elif [ $1 = log_file -a $2 = pos ];then
        log_file_pos=`${mysql_con} -e "show slave status\G;"|egrep -w "Master_Log_File|Read_Master_Log_Pos|Relay_Master_Log_File|Exec_Master_Log_Pos"`
        Master_Log_File=`echo $log_file_pos|awk '{print $2}'`
        Read_Master_Log_Pos=`echo $log_file_pos|awk '{print $4}'`
        Relay_Master_Log_File=`echo $log_file_pos|awk '{print $6}'`
        Exec_Master_Log_Pos=`echo $log_file_pos|awk '{print $8}'`
    fi
}
 
action() {
    ###經判斷'應該&可以'切換時執行的動作
    echo -e "`date "+%F  %H:%M:%S"`    -----set read_only = 0 on DB2-----" >> $change_log
 
    ###解除read_only屬性
    ${mysql_con} -e "set global read_only = 0;" 2>> $change_log
 
    echo "DB2 keepalived轉為MASTER狀態，線上數據庫切換至DB2"|mail -s "DB2 keepalived change to MASTER"\
    [email protected] 2>> $change_log
 
    echo -e "---------------------------------------------------------\n" >> $change_log
}
 
slave_info slave_status
if [ $Slave_SQL_Running = Yes ];then
    i=0    #一個計數器
    slave_info log_file pos
        ###判斷從master接收到的binlog是否全部在本地執行(這樣仍無法完全確定從庫已追上主庫，因為無法完全保證io_thread沒有延時(由網絡傳輸問題導致的從庫落後的概率很小)
    until [ $Master_Log_File = $Relay_Master_Log_File -a $Read_Master_Log_Pos = $Exec_Master_Log_Pos ]
     do
        if [ $i -lt 10 ];then    #將等待exec_pos追上read_pos的時間限制為10s
            echo -e "`date "+%F  %H:%M:%S"`    -----Relay_Master_Log_File=$Relay_Master_Log_File,Exec_Master_Log_Pos=$Exec_Master_Log_Pos is behind Master_Log_File=$Master_Log_File,Read_Master_Log_Pos=$Read_Master_Log_Pos, wait......" >> $change_log    #輸出消息到日志，等待exec_pos=read_pos
            i=$(($i+1))
            sleep 1
            slave_info log_file pos
        else
            echo -e "The waits time is more than 10s,now force change. Master_Log_File=$Master_Log_File Read_Master_Log_Pos=$Read_Master_Log_Pos Relay_Master_Log_File=$Relay_Master_Log_File Exec_Master_Log_Pos=$Exec_Master_Log_Pos" >> $change_log
            action
            exit 0
        fi
    done
    action 
 
else
    slave_info log_file pos
    echo -e "DB2's slave status is wrong,now force change. Master_Log_File=$Master_Log_File Read_Master_Log_Pos=$Read_Master_Log_Pos Relay_Master_Log_File=$Relay_Master_Log_File Exec_Master_Log_Pos=$Exec_Master_Log_Pos" >> $change_log
    action
fi

整個腳本的邏輯是讓從的Exec_Master_Log_Pos盡可能的追上Read_Master_Log_Pos，它給了10s的限制，如果還是沒有追上，則直接將master2設置為主（通過解除read_only屬性），其實這裡面還是有待商榷的，譬如10s的限制是否合理，還是一定需要Exec_Master_Log_Pos=Read_Master_Log_Pos才切換。

當原主恢復正常後，如何將VIP從master2切回到master1中呢？

#!/bin/bash
###手動執行將主庫切換回DB1的操作
 
mysql_con='mysql -uroot -p123456'
 
echo -e "`date "+%F  %H:%M:%S"`    -----change to BACKUP manually-----" >> /etc/keepalived/logs/state_change.log
echo -e "`date "+%F  %H:%M:%S"`    -----set read_only = 1 on DB2-----" >> /etc/keepalived/logs/state_change.log
$mysql_con -e "set global read_only = 1;" 2>> /etc/keepalived/logs/state_change.log
 
###kill掉當前客戶端連接
echo -e "`date "+%F  %H:%M:%S"`    -----kill current client thread-----" >> /etc/keepalived/logs/state_change.log
rm -f /tmp/kill.sql &>/dev/null
###這裡其實是一個批量kill線程的小技巧
$mysql_con -e 'select concat("kill ",id,";") from  information_schema.PROCESSLIST where command="Query" or command="Execute" into outfile "/tmp/kill.sql";'
$mysql_con -e "source /tmp/kill.sql" 2>> /etc/keepalived/logs/state_change.log
sleep 2    ###給kill一個執行和緩沖時間
 
###確保DB1已經追上了,下面的repl為復制所用的賬戶，-h後跟DB1的內網IP
log_file_pos=`mysql -urepl -pmysql -h192.168.244.145 -e "show slave status\G;"|egrep -w "Master_Log_File|Read_Master_Log_Pos|Relay_Master_Log_File|Exec_Master_Log_Pos"`
Master_Log_File=`echo $log_file_pos|awk '{print $2}'`
Read_Master_Log_Pos=`echo $log_file_pos|awk '{print $4}'`
Relay_Master_Log_File=`echo $log_file_pos|awk '{print $6}'`
Exec_Master_Log_Pos=`echo $log_file_pos|awk '{print $8}'`
until [ $Read_Master_Log_Pos = $Exec_Master_Log_Pos -a $Master_Log_File = $Relay_Master_Log_File ]
do
    echo -e "`date "+%F  %H:%M:%S"`    -----DB1 Exec_Master_Log_Pos($exec_pos) is behind Read_Master_Log_Pos($read_pos), wait......" >> /etc/keepalived/logs/state_change.log
    sleep 1
done
 
###然後解除DB1的read_only屬性
echo -e "`date "+%F  %H:%M:%S"`    -----set read_only = 0 on DB1-----" >> /etc/keepalived/logs/state_change.log
ssh 192.168.244.145 'mysql -uroot -p123456 -e "set global read_only = 0;" && /etc/init.d/keepalived start' 2>> /etc/keepalived/logs/state_change.log
 
###重啟DB2的keepalived使VIP漂移到DB1
echo -e "`date "+%F  %H:%M:%S"`    -----make VIP move to DB1-----" >> /etc/keepalived/logs/state_change.log
/sbin/service keepalived restart &>> /etc/keepalived/logs/state_change.log
 
echo "DB2 keepalived轉為BACKUP狀態，線上數據庫切換至DB1"|mail -s "DB2 keepalived change to BACKUP" [email protected] 2>> /etc/keepalived/logs/state_change.log
 
echo -e "--------------------------------------------------\n" >> /etc/keepalived/logs/state_change.log

總結：

1. /etc/keepalived/check_mysql.sh和/etc/keepalived/notify_master_mysql.sh必須加可執行權限。

    如果前者沒有加可執行權限，則master1上將不會綁定VIP，日志直接提示如下信息：

May 25 14:37:09 master1 Keepalived_vrrp[3165]: VRRP_Instance(VI_1) Entering BACKUP STATE
May 25 14:37:09 master1 Keepalived_vrrp[3165]: VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(10,11)]
May 25 14:37:50 master1 Keepalived_vrrp[3165]: VRRP_Instance(VI_1) Now in FAULT state

2. 在Keepalived中有兩種模式，分別是master->backup模式和backup->backup模式，這兩種模式有什麼區別呢？

    在master->backup模式下，一旦主庫宕掉，虛擬IP會自動漂移到從庫，當主庫修復後，keepalived啟動後，還會把虛擬IP搶過來，即使你設置nopreempt（不搶占）的方式搶占IP的動作也會發生。在backup->backup模式下，當主庫宕掉後虛擬IP會自動漂移到從庫上，當原主恢復之後重啟keepalived服務，並不會搶占新主的虛擬IP，即使是優先級高於從庫的優先級別，也不會搶占IP。為了減少IP的漂移次數，生產中我們通常是把修復好的主庫當做新主庫的備庫。

3. 本文是在MySQL主庫高可用 -- 雙主單活故障自動切換方案 基礎上，結合自己對於MySQL的理解整理的。原文的腳本直接執行有點問題，思路有有點瑕疵，於是結合自己的實際環境，重新修改了一把。

4. 在測試的過程中，有以下幾點需要注意：

    1> master1檢測腳本的邏輯是如果MySQL的服務不可用，則通過service keepalived stop命令來關閉keepalived，但在實際測試的過程中，卻出現了即便執行了service keepalived stop命令，keepalived進程依然沒有停止，導致MySQL的服務雖然不可用了，但VIP並不沒有漂移到master2上。

         優化方案：在執行service keepalived stop後，等待5s，再次檢測keepalived的狀態，如果keepalived沒有關閉，則直接kill掉。

    2>  keepalived的日志默認是輸出到/var/log/messages中，這樣不便於查看。如何自定義keepalived的日志輸出文件呢？

          如果是用service啟動的，修改/etc/sysconfig/keepalived文件

KEEPALIVED_OPTIONS="-D -d -S 0" 

         如果不是，則啟動的時候指定以上參數，如：

/usr/local/keepalived/sbin/keepalived -d -D -S 0 

        修改/etc/syslog.conf

# keepalived -S 0 
local0.*                                                /var/log/keepalived.log

       重啟syslog

       RHEL 5&6：service syslog restart

       RHEL 7：service rsyslog restart