只能遠程協助的方式。我特意做了一個腳本,用電話指導客戶在SSMS裡執行一下腳本就可以了
1.0的數據庫跟1.1的數據庫的區別是1.1的數據庫裡的其中一個[CT_OuterCard]表比1.0的多了6個字段,其他所有表都一樣
還有存儲過程增加了很多,其他都沒有改變
首先,先在公司的服務器數據庫上生成存儲過程腳本,數據庫是1.1版本的,下面的圖片裡沒有說明的,都是默認設置,下一步即可
選中數據庫-》右鍵—》任務-》生成腳本
當然,如果你的數據庫裡有自定義函數的話,也可以勾選函數,如果我們的數據庫沒有函數,所以。。。
保存到新建查詢窗口
這一步做完了,然後編寫下面的SQL腳本
復制代碼 代碼如下:
--升級GPOS1.0到GPOS1.1數據庫的升級腳本 2013-7-4
USE [GPOSDB]
GO
------------------刪除所有存儲過程-------------------
--select * from sys.procedures
declare @sql varchar(4000)
set @sql=''
select @sql=@sql+'drop proc '+name+'; ' from sys.procedures
--print @sql
exec(@sql)
--------------------------------在[CT_OuterCard]表添加6個字段-------------------------------
ALTER TABLE [dbo].[CT_OuterCard] ADD [I_LimitTransCurrCount] INT NOT NULL CONSTRAINT [DF_CT_OuterCard_I_LimitTransCurrCount] DEFAULT ((0))
ALTER TABLE [dbo].[CT_OuterCard] ADD [I_LimitTransType] [int] CONSTRAINT [DF_CT_OuterCard_I_LimitTransType] DEFAULT ((0))
ALTER TABLE [dbo].[CT_OuterCard] ADD [DE_LimitTransTotal] [decimal](18, 2) NOT NULL CONSTRAINT [DF_CT_OuterCard_DE_LimitTransTotal] DEFAULT ((0))
ALTER TABLE [dbo].[CT_OuterCard] ADD [DE_LimitTransCurrTotal] [decimal](18, 2) NOT NULL CONSTRAINT [DF_CT_OuterCard_DE_LimitTransCurrTotal] DEFAULT ((0))
ALTER TABLE [dbo].[CT_OuterCard] ADD [I_LimitCarNo] [int] NOT NULL CONSTRAINT [DF_CT_OuterCard_I_LimitCarNo] DEFAULT ((0))
ALTER TABLE [dbo].[CT_OuterCard] ADD [D_LimitDate] [datetime] NOT NULL CONSTRAINT [DF_CT_OuterCard_D_LimitDate] DEFAULT (getdate())
--------------------------------------------------------------------------------------------------------------
--把剛才在新建查詢窗口裡生成的存儲過程腳本粘貼到下面
---------------------------創建GPOS1.1的所有存儲過程---------------------------------------------
USE [GPOSDB]
GO
/****** 對象: StoredProcedure [dbo].[Report_GreaserSaleStat] 腳本日期: 07/04/2013 13:27:09 ******/
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER OFF
GO
CREATE PROC [dbo].[Report_GreaserSaleStat]
@StartDate datetime,
@EndDate datetime,
@Action int --0為交易記錄,1為班次記錄
insert into #tmpCardAmoutStat
(
VC_OC_CardNO,
set @i=@i+1
end
truncate table #tmpCards
insert into #tmpCards(VC_OC_CardNO)
select VC_OC_CardNO from CT_OuterCard where isnull(VC_OC_Company,'')=''
set @j=1
select @cardcount=count(*) from #tmpCards
while @j<=@cardcount
begin
select @VC_OC_CardNO=VC_OC_CardNO from #tmpCards where IndexId=@j
insert into #tmpCardAmoutStat
(
VC_OC_CardNO,
insert into #tmpCardAmoutStat
(
VC_OC_CardNO,
CompanyName,
VC_OC_UserName,
StartAmount,
FillMoney,
ConsumeSumVol,
ConsumeMoney,
SumConsumeSumVol,
SumConsumeMoney,
SumFillMoney
)
select
null,
null,
'客戶卡小計',
sum(StartAmount),
sum(FillMoney),
sum(ConsumeSumVol),
truncate table #tmpCards
insert into #tmpCards(VC_OC_CardNO)
select VC_IC_CardNO from CT_InhouseCard where isnull(VC_IC_CardNO,'')<>''
set @j=1
select @cardcount=count(*) from #tmpCards
while @j<=@cardcount
begin
select @VC_OC_CardNO=VC_OC_CardNO from #tmpCards where IndexId=@j
insert into #tmpCardAmoutStat
(
VC_OC_CardNO,
CompanyName,
VC_OC_UserName,
StartAmount,
FillMoney,
ConsumeSumVol,
ConsumeMoney,
SumConsumeSumVol,
SumConsumeMoney,
SumFillMoney
)
select
@VC_OC_CardNO,
'員工卡',
isnull((select VC_IC_UserName from CT_InhouseCard where VC_IC_CardNO=@VC_OC_CardNO),''),
isnull((select top 1 DE_FD_Amount from CT_FuelingData where VC_FD_Cardno=@VC_OC_CardNO and (D_FD_DateTime<=@StartDate) order by D_FD_DateTime desc),0),
isnull((select sum(DE_A_AppendAmount) from CT_Append where VC_A_CardNO=@VC_OC_CardNO and (D_A_AppendDateTime between @StartDate and @EndDate)),0),
isnull((select sum(DE_FD_Volume) from CT_FuelingData where VC_FD_Cardno=@VC_OC_CardNO and (D_FD_DateTime between @StartDate and @EndDate)),0),
isnull((select sum(DE_FD_Amount) from CT_FuelingData where VC_FD_Cardno=@VC_OC_CardNO and (D_FD_DateTime between @StartDate and @EndDate)),0),
isnull((select sum(DE_FD_Volume) from CT_FuelingData where VC_FD_Cardno=@VC_OC_CardNO),0),
isnull((select sum(DE_FD_Amount) from CT_FuelingData where VC_FD_Cardno=@VC_OC_CardNO),0),
isnull((select sum(DE_A_AppendAmount) from CT_Append where VC_A_CardNO=@VC_OC_CardNO),0)
set @j=@j+1
end
insert into #tmpCardAmoutStat
(
VC_OC_CardNO,
CompanyName,
VC_OC_UserName,
StartAmount,
FillMoney,
ConsumeSumVol,
ConsumeMoney,
SumConsumeSumVol,
SumConsumeMoney,
SumFillMoney
)
select
null,
null,
'員工卡小計',
sum(StartAmount),
sum(FillMoney),
sum(ConsumeSumVol),
sum(ConsumeMoney),
sum(SumConsumeSumVol),
sum(SumConsumeMoney),
sum(SumFillMoney)
from
#tmpCardAmoutStat
where
CompanyName='員工卡'
---計算員工卡匯總結束---
end
----計算總匯總開始---
insert into #tmpCardAmoutStat
(
VC_OC_CardNO,
CompanyName,
VC_OC_UserName,
StartAmount,
FillMoney,
ConsumeSumVol,
ConsumeMoney,
SumConsumeSumVol,
SumConsumeMoney,
SumFillMoney
)
select
null,
null,
'總計',
sum(StartAmount),
sum(FillMoney),
sum(ConsumeSumVol),
sum(ConsumeMoney),
sum(SumConsumeSumVol),
sum(SumConsumeMoney),
sum(SumFillMoney)
from
#tmpCardAmoutStat
where
(VC_OC_UserName='客戶卡小計' or VC_OC_UserName='員工卡小計') and VC_OC_CardNO is null
update #tmpCardAmoutStat set EndAmount=StartAmount+FillMoney-ConsumeMoney
---計算總匯總結束---
select * from #tmpCardAmoutStat
drop table #tmpCards
drop table #tmpCompanys
drop table #tmpCardAmoutStat
GO
--其他存儲過程省略。。。。。。。。。。。
當然如果某些表的主鍵更改了也很簡單,使用alter table alter column語句修改一下就可以了
如有不對的地方,歡迎大家拍磚o(∩_∩)o